Rust Inhibitors(7-aug)

RP-5001

Know More

RP-5010

Know More

RP-5151

Know More

RP-5001

A Safe Water Soluble Rust Preventative, Rapid Dryer, Solvent and Detergent

RP-5001 is an extremely versatile material for use in many industries and possesses many useful properties in countless applications. Wherever water is used in contact with steel, RP-5001 can be used. Where water is considered harmful, it can be made safe, rust proof and useful. RP-5001 is a protective material recommended for use on iron, steel, and electroplated coatings such as cadmium, zinc, tin, nickel or chrome.

RP-5001 is a concentrated colorless solution that you add to water in recommended proportions. The resulting solution will passivate steel surfaces due to the presence of selected oxidizing ions and non-ionic surfactants. Parts dipped in a RP-5001 solution will, after drying, be protected or inhibited against corrosion. A few examples where such a dip is required is in the final rinse after plating, cleaning, pickling, phosphating, black oxidizing, tumbling, vapor blasting, wet grinding, heat treating or general machine shop use between operations.

Water evaporates almost immediately from a metal surface after withdrawing from a dip in warm RP-5001. This extremely fast drying occurs because of the non-ionics present which reduce surface tension to a remarkable degree and accelerate the shedding of water from all surfaces. The remaining invisible, dry, non-oily film that is nonmeasurable will inhibit against rust or corrosion. The properties of the metal or plated surface are unchanged and retain their original luster or brightness.

RP-5001 is a good solvent, combining wetting and detergent properties. Where washing of heat-treated parts quenched from a salt bath into oil is a problem, a soak in warm RP-5001 completely removes all oil and salts and protects the parts from rust. The detergent properties are an advantage in removing light oil films from metals and preventing fingerprint stains. RP-5001 in these instances will replace costly solvent cleaners or harsh alkali cleaners. Wash off if used anywhere before plating. RP-5001 will penetrate into the deepest crevices of any odd shaped piece and give complete protection. Even parts that are partly oily and partly unprotected can be dipped all over to insure overall protection.

9

In practically all cases, painting or lacquering can be done without removing the RP-5001 film. However, in any case the film comes off instantly by rinsing in water if it interferes.

9

RP-5001 is a completely safe material under all operating conditions. Tests conducted against other materials proved that RP-5001 is faster, better and more economical.

9

RP-5001 is an odorless, neutral, non-toxic and stable material. It is non-inflammable, non-oily, non-tacky and invisible when dry. RP-5001 works equally well in hard or soft water and works hot or cold.

9

Plain steel tanks are all that is needed for containers. RP-5001 will prevent the tank from rusting and water stays cleaner as long as it is used. A wide operating range makes it unnecessary for strict control as RP-5001 is effective at all temperatures from 70oF and upwards to 180oF. A little bit goes a long way as practically all operations require only 2 to 4% and, as a rinse, only 0.1%.

9

Try to keep your RP-5001 solution free from contamination as possible. It cannot be mixed with any acids and will tolerate only very slight amounts of caustic or alkalis.

9

RP-5001 is not intended for use as a high temperature rust preventive but will stand up well under high humidity provided there is no run-off to carry away the film. It is suitable for dipping or spraying or can be used as a swab in cleaning difficult to dip pieces or parts covered with hard to remove oils, grease or soils. RP-5001 protects against rust on indoor applications and is not intended for use on items exposed to severe weather conditions.

9

Use RP-5001 wherever you use water. Water becomes more valuable and useful and where water is considered harmful, RP-5001 is safe.

Suggested Uses And Mixing Proportions

Z

As a Rust Inhibitor:

4 to 6% RP-5001. Temperature 70o – 120oF. Surface of material may be wet or dry before dipping.

Z

As a Final Rinse:

In all phases of plating, phosphating, anodizing or black oxidizing. 0.1% RP-5001. Temperature 160o-200oF. Speeds drying, prevents water stains and preserves bright finishes.
Z

For Tumbling Barrel, Ball Burnishing, Abrasive Tumbling:

Use 4% in the barrel or dip immediately after to prevent rust and preserve the finish. RP-5001 will replace caustic and cyanide in tumbling. Use it in ball burnishing instead of soap. Add RP-5001 in abrasive tumbling as it reduces surface tension, thereby sharpening the cutting action.
Z

As A Rinse After Vapor Blasting, Liquid Honing and Sand Blasting:

4 to 6% RP-5001. Will clean and protect against rust.
Z

Quenching Steel:

2 to 4%. It will assure uniform heat absorption and convection, which reduces chances of cracking or distortion. It will also protect tank against rusting, and work won’t rust after drying.
Z

To Remove Heat Treating Salts:

4%. Temperature 180oF. Very effective in removing all types of heat-treating salts from oil quenched work. The oil will float to the top and may be skimmed or run off easily. Barium base salts, either neutral or carburizing will not wash off easily in alkali cleaners but RP-5001 does help immensely.
Z

As a Flux Remover:

6 to 7% RP-5001. Temperature 180oF. Will remove proprietary fluxing compounds after furnace, torch or induction brazing and welding. Protects steel before brazing as well.
Z

General Machine Shop Use:

4% RP-5001. Use warm or at room temperature. Dip parts after machining for protection and to prevent finger print stains. Will protect any valuable part in process or between operations in different parts of the plant. Will also protect finished parts in storage. Excellent for nuts, bolts or any screw machine part that can’t be stored or shipped to customer oily.
Z

As A Solvent:

4 to 6% RP-5001. Temperature 70oF-120oF. Good for removing very light, thin oil and grease films, as well as dirt, lint and to prevent finger prints. RP-5001 will not harm the hands so that parts not easily dipped may be swabbed with a sponge or cloth. RP-5001 is more comfortable to use in such cases instead of toxic, dangerous or inflammable solvents, which usually require ventilation to carry away objectionable odors or fumes.
Z

As A General Cleaner and Detergent:

2 to 6% RP-5001. Temperature 70o – 120 oF. For cleaning machinery, glass, tile floors or walls and plastics.
Z

Added To Soluble Oils:

1 quart RP-5001 to 50 gallons of oil and water mixture. Using RP-5001 in operations requiring soluble oils offers additional advantages and improves the properties of the oil emulsion. The improved wetting action helps dissipate heat and work under the tool is cooler. RP-5001 also imparts additional rust protection to the oil as well as fortifying the emulsion against going rancid. RP-5001 extends the useful life of soluble oils.
Z

Handling:

Protect eyes and skin from contact. If splashed into eyes, drench with water and consult a physician immediately.

Test Kit Method Analysis

  1. Place a 30 ml sample of the solution to be analyzed in the small glass bottle.
  2. Add 3 to 4 drops Methyl Orange – Xylene Cyanole Indicator
  3. Add 1.0 N HCl drop-wise until color changes from green to gold.

Operating Conditions:

RP 5001 # of drops 1.0 N HCl
1% 6
2% 12
3% 13
4% 14
5% 15
6% 17
Download Info

At So Clean Solutions We Strive To Create Better, Safer And Cost Effective Cleaners For All Types Of Manufacturing.

View Industrial Products

RP-5010

A Safe Water Soluble Rust Preventative

RP-5010 is an extremely versatile rust preventative material specifically designed to be used in spray applications. Its unique formulation allows for fast drying because of the non-ionics present which reduce surface tension to a remarkable degree and accelerate the shedding of water from all surfaces. The remaining invisible, dry, non-oily film that is nonmeasurable will inhibit against rust or corrosion. The properties of the metal surface are unchanged and retain their original luster or brightness. RP-5010 is a completely safe material under all operating conditions. Tests conducted against other materials proved that RP-5010 is faster, better and more economical. RP-5010 is an odorless, neutral, non-toxic and stable material. It is non-flammable, non-oily, non-tacky and invisible when dry. RP-5010 works equally well in hard or soft water and works hot or cold. Plain steel tanks are all that is needed for containers. RP-5010 will prevent the tank from rusting and water stays cleaner as long as it is used. A wide operating range makes it unnecessary for strict control as RP-5010 is effective at all temperatures from 70oF and upwards to 180oF. Try to keep your RP-5010 solution free from contamination as possible. It cannot be mixed with any acids and will tolerate only very slight amounts of caustic or alkalis. RP-5010 is not intended for use as a high temperature rust preventive but will stand up well under high humidity provided there is no run-off to carry away the film. RP-5010 protects against rust on indoor applications and is not intended for use on items exposed to severe weather conditions. Use RP-5010 wherever you use water. Water becomes more valuable and useful and where water is considered harmful, RP-5010 is safe.

Suggested Uses And Mixing Proportions

Z

As a Rust Inhibitor for Spray Applications:

15-25% RP-5010. Temeperature 70°-120°F
Z

General Machine Shop Use:

15% RP-5010. Use warm or at room temperature. Dip parts after machining for protection and to prevent finger print stains. Will protect any valuable part in process or between operations in different parts of the plant. Will also protect finished parts in storage. Excellent for nuts, bolts or any screw machine part that can’t be stored or shipped to customer oily.
Z

Handling:

Protect eyes and skin from contact. If splashed into eyes, drench with water and consult a physician immediately.

Download Info

RP-5151

Rust Preventive 5151 is a rust preventive compound intended for use in spray applications. It will prevent rusting of active, clean steel, even when wet. RP-5151 works well where protection for indoor storage is required along with ease of handling and economical costs. It forms a film that prevents iron from forming the iron oxide rust. The film will rinse off easily in any cleaner, is non-oil, and is compatible with most water-soluble paint formulations. Rust Preventive 5151 is a mixes easily with water and is compatible with a wide variety of water conditions. The strength of RP-5151 required will vary according to the type of steel, its degree of cleanliness and activity, and contaminants on the parts. Normally, 2 to 5% is sufficient. RP-5151 can be sprayed at any temperature convenient to your operation.

The benefits of using RP-5151 are:

Z

Easy to use short-term protection

Z

Economical

Z

Non-staining coating

Read Material Safety Data Sheet before using this product.

Download Info